Thursday 18th July. Murray Taylor on Chip Carving

/in /by

 

Murray Taylor covered 3 topics, Chip Carving, Sharpening Knives,  and Lettering with a Knife.   There are no British books on chip carving but Murray hopes to remedy this in the near future, building on his articles in the Woodcarving magazine

Murray was aware that many?of our members consider chip carving to be boring, and set out to prove that it was not just a pattern of triangles; it can do lots of interesting designs, lettering, and pictorial work.

All the equipment needed is:-a Pfeil chip  carving knife, a stabbing knife (don’t be worried – the blade is only 1?inch long), an ordinary ruler preferably with black markings on a white background, a T square, a mechanical pencil with 2B leads, a bow compass, a sharpening stone, a  strop, and wood.   Murray mainly uses Lime wood from the original Hobbies  shop https://www.alwayshobbies.com .   Murray showed us his way of chip carving.   Accurate marking out is most important and he has designed a tool that  marks 4mm dots from which a grid can easily be produced.   A pyramid of 4mm is easier on the wrist than 5mm!!  He showed us taking out the standard triangular pyramids.  He has very strong arms and wrists from a life time as a manufacturing jeweller, but he showed us a way to apply extra pressure should we need it.

 

 

 

Some examples of various patterns that Murray uses.

 

 

 

 

 

 

 

 

For more adventurous work Murray uses a knife like a pen

 

 

 

 

 

 

 

 

The chip carving knife lends itself to various alphabets

 

 

 

 

 

 

All this work needs a sharp knife, and Murray showed us his way of doing it.  Although some knives are sold as ready sharpened, that do not come to his standards.  He recommends ceramic stones that do not wear so are always flat!!